| Product Name and Description |
Usage Rate |
Packaging |
|
CHANNELWOOD BORACOL 10Rh - A water-borne, glycol-Borate
based masonry steriliser, surface biocide and timber preservative.
Ready for use. HSE No: 4911
|
4 - 5 sq.m./litre/coat |
5litre and 25litre
|
|
CHANNELWOOD BORACOL 20 - A ready for use glycol borate based
wood preservative for the eradication of both insects and fungi.
HSE No: 6339
|
8 sq.m./litre/coat |
2.5litre, 5litre, and 25litre |
|
CHANNELWOOD BORACOL 40/1 WOOD PRESERVATIVE GEL - A specially
designed glycol paste for the preservation of joinery and particularly
large section timbers. Applied by low pressure injection from cartridges.
HSE No: 6133
|
as required |
400cc cartridge |
|
ACS BORON WOOD PRESERVATIVE PASTE - A thixotropic boron
paste for injection or filling into pre-drilled holes or cavities
in a variety of timbers. HSE No: 6093
|
as required |
400cc cartridge and 5kgs
|
|
ACS ECOBOR 11 - A superior, deep penetration, brushable
and injectable Boron based gel. HSE No. 6838
|
2 - 2.5 sq.m./litre by brush. Inject as necessary |
2.5litres and 5litres |
|
ACS BOROTREAT 10P - A water soluble, Borate-based powder
concentrate, combined timber preservative and masonry biocide. Diluted
1:10 with water, 1 hour re-entry. HSE No: 6335
|
4 - 8 sq.m./litre dependent on use |
0.5Kg and 2.5Kg |
| ACS BORON RODS - Allow precision targeting and
loading of preservative. A fused, exceptionally concentrated wood
preservative for use in a wide variety of applications. Precise loadings
and targeting of preservative. Clean and easy to handle. Supplied
in bags of 1 and 10. HSE No: 6115 |
as required |
8mm dia. lengths 12mm, 24mm, 48mm, 65mm.
12mm dia. lengths 50mm, 100mm.
18mm dia length 75mm
|
|
ACS DRY ROT PAINT - Highly visible surface biocide and sterilising
treatment against Dry rot and other decay fungi. Wood and masonry
treatment. HSE No: 6310
|
2 - 8 sq.m./litre dependent on substrate |
5 litre |
Fire retardant coatings for interior and exterior use to give protection
to Class O and 1, and 30 minutes. Details and specifications available
on request
|
ACS UNIVERSAL WATER REPELLENT (for masonry and wood) - A
specially formulated water-based, ready to use water repellent for
both timber and masonry. .Suitable for use on interior and exterior
surfaces.
|
Varies, dependent on substrate |
5litre and 25litre |
|
MICROPOROUS TIMBER COATING - A range of three medium build,
microporous, flexible and extremely durable coatings for application
to most hardwood and softwood construction joinery. Available in
coloured, transparent finish, opaque and full gloss finish.
|
9 – 14 sq.m./litre depending on substrate |
1litre, 2.5 litre, 5litre and 25litre |
|
ACS OAKOTE 600 - A specially formulated, microporous, fast-drying,
waterborne protective coating for application to green oak and other
joinery (softwood and hardwood)
|
20 – 30 sq.m./litre depending on substrate |
1litre, 2.5litre, 5litre and 25litre
|
ACS products are guaranteed against defective materials and manufacture
and sold subject to our standard Terms and Conditions of Sale, copies
of which are available on request.
Instructions for the use and handling of individual products are included
on each container label. Details for specific applications are given in
the appropriate Technical Data Sheets. Further advice and guidance is
available, if required, from the Technical Department.
HEALTH AND SAFETY - ALL PRODUCTS SHOULD BE HANDLED WITH CARE AND PARTICULAR
ATTENTION PAID TO THE PRECAUTIONS ON THE INDIVIDUAL CONTAINERS AND SAFETY
DATA SHEETS (SDS).
This information given in good faith is based on many years of experience
and usage. However, all recommendations are made without guarantee since
the conditions of use are beyond our control.
.
Go Direct to Order Page
|
